Submit files in PNG or JPEG format with at least 150 DPI
We recommend using PNG for designs with a transparent background. For other designs, we advise preparing files in JPEG instead.
Men’s T-Shirts
Bella + Canvas 3001C Unisex Jersey T-Shirt
Print custom tees with these soft and comfortable Bella+Canvas T-shirts. Each jersey T-shirt will be printed with the design that you upload or create using our website.
Fabric:
- 4.2 oz., 100% airlume combed and ringspun cotton, 32 singles
- Ash is 99% airlume combed and ringspun cotton, 1% polyester
- Athletic Heather and Black Heather is 90% airlume combed and ringspun cotton, 10% polyester
- All other heather/blend colors are 52% airlume combed and ringspun cotton, 48% polyester
- Retail fit
- Unisex sizing
- Shoulder taping
- Side-seamed
- Tear away label
- Pre-shrunk
Sizing Chart
| XS | S | M | L | XL | 2XL | 3XL | 4XL | |
|---|---|---|---|---|---|---|---|---|
| Width | 16.5" | 18" | 20" | 22" | 24" | 26" | 28" | 30" |
| Length | 27" | 28" | 29" | 30" | 31" | 32" | 33" | 34" |
| Sleeve Length | 8" | 8.25" | 8.63" | 9.13" | 9.63" | 10.25" | - | - |
| Disclaimer: | This is intended to be a guide only, and while we do our best to ensure all our sizing is consistent, you may find that some styles vary in size. Follow instructions on laundry tag for best care results. eprintfast is not responsible for damage caused otherwise. |
How to measure:
WIDTH: Lay garment flat. 1" below the armhole flat measure the garment across the chest.
LENGTH: Lay garment flat (face down). Measure from center back neckline seam straight down to bottom of the front hem.
SLEEVE LENGTH: Lay garment flat(face down). Measure from center back neck to outer edge of shoulder seam, then along outer edge to sleeve end.
Artwork Setup Guide
DTG Guidelines
1
2
Create files in sRGB color profile
To ensure that your design looks as close as possible to what appears on your screen, make sure you create your print file in sRGB color profile.
3
Remove print file template guidelines
If you use our downloadable templates, delete the guide layers before saving your files. If you don't delete them, they'll show up on the print.
Tips for Best Results
• Avoid semi-transparent designs
Semi-transparent graphics (or elements with lowered opacity) don't translate well in DTG printing. We advise using solid colors or simulating semi-transparency by halftoning (for more information, see our video tutorial).
• Create designs with the necessary DPI
Simply typing in a new resolution value into the file won't result in a higher resolution print. If your graphic's resolution is too low, the best solution is to recreate it.
• Use transparency to your advantage
Black ink will appear gray on black garments because of the white underbase used during printing. Leave these areas fully transparent when designing for black garments. Download our guide for how to remove backgrounds.
• Avoid borders when designing sleeve prints
We advise against using graphics with perfect borders for sleeve printing, since the print can warp slightly when the sleeve is being pulled off the pallet.
!
Disclaimers
- If images are upload with a non-transparent background, this background will appear when printed. Download our guide for how to remove backgrounds.
- We don't print white ink on white shirts. Any designs for white shirts containing white color will have areas with no print on them.
- White ink elements on bright-colored garments might look tinted. This is most evident on red, maroon, and other similarly colored garments.
- Follow instructions on laundry tag for best care results. eprintfast is not responsible for damage caused otherwise.
- There might be slight discrepancies in print placement.